Browse guides by topic, or search for a setting, command or solution.
16 articles found
Choose a topic to jump straight to the information you need.
12 articles in this section
Learn how to manage MeshCore Access Control Lists (ACLs) using CLI commands to control node permissions, manage authorised administrators, and configure access to your mesh network. This guide explains how to manage access securely and maintain control over who can administer your MeshCore node.
Learn how to configure and manage your MeshCore node using CLI commands. This guide covers device settings, radio parameters, network configuration, and other options to customise your node's behaviour and optimise its operation within the mesh network.
Learn how to view and manage Ethernet settings in MeshCore using CLI commands when Ethernet support is compiled into the firmware. This guide covers Ethernet configuration and network status to help you verify connectivity, inspect network settings, and troubleshoot Ethernet-related issues on supported devices.
Explore MeshCore information CLI commands to view node details, firmware versions, device configuration, and network information. Use these commands to understand your node's capabilities, verify its configuration, and assist with troubleshooting.
Learn how to manage MeshCore logging using CLI commands, including configuring log levels, viewing diagnostic information, and troubleshooting node behaviour to help identify issues and monitor system activity.
Explore MeshCore neighbour information using CLI commands to discover nearby nodes, view their details, check signal quality, and understand connectivity across the mesh network.
A practical reference guide to MeshCore CLI commands, explaining how to manage, configure, and troubleshoot your MeshCore node from the command line.
Learn how to manage regions in MeshCore using CLI commands introduced in firmware v1.10 and later. This guide covers configuring regional settings, managing region boundaries, and controlling how region-based rules affect mesh traffic to help organise your network and manage packet routing.
Learn how to manage MeshCore routing using CLI commands to configure routing behaviour, inspect message paths, and understand how packets travel between nodes. These commands help you troubleshoot connectivity, optimise mesh performance, and maintain reliable communication across the network.
Learn how to view and manage sensor functionality in MeshCore using CLI commands when sensor support is compiled into the firmware. This guide covers sensor configuration and monitoring to help you check available sensor data, manage supported hardware, and understand how environmental or device readings are used within your mesh network.
View MeshCore node statistics using CLI commands to monitor network activity, message counts, uptime, packet delivery, and other performance metrics to help understand how your node is operating within the mesh network.
Explore MeshCore system CLI commands for managing node behaviour, controlling device operations, and configuring system-level settings. This guide helps you maintain your node, manage essential functions, and troubleshoot system-related issues.
1 article in this section
Learn how to view and manage GPS settings in MeshCore using CLI commands when GPS support is compiled into the firmware. This guide covers GPS configuration and location information to help you check GPS functionality and manage location-related settings on supported devices.
2 articles in this section
MeshCore Region Configuration Guide for Lincolnshire
What to record when documenting a repeater.
1 article in this section
A template for community troubleshooting articles.
